SALUSUFHBS | UFH Discrete Button Sensor 10kΩ @25°C

UFH Discrete Button Sensor 10kΩ @25°C

Low Profile ''Button'' Sensor Temperature Sensor

Brand:	Salus
Quantity:

Description

Specification

The Low Profile "Button" Sensor is ideal for locations where aesthetics are as important as the temperature measurement.

The inconspicuous wall sensor mounts easily by pushing through a 12mm hole and secured with a peel-off insulating adhesive ring. The only visible portion is a flush 22mm dot on the wall.

The Low Profile "Button" Sensor is available in white and can be painted.

Features & Options:

Small flush sensor mounting
Accurate direct air measurement
Paintable with latex or oil base products
Discreet and unobtrusive
Suitable for bathrooms/ wet rooms
Compatible with most thermostats with external sensing option

Temp. Output	Resistance
Accuracy (Std)	±0.36°F, (±0.2°C)
Stability	< 0.036°F/Year, (<0.02°C/Year)
Heat Dissipation	2.7 MW/°C
Temp. Drift	<0.02°C Per Year
Probe Range	-40° To 221 °F (-40° To 105°C)
RTD
Platinum (PT)	100Ω or 1kΩ @0°C, 385 Curve
Platinum (PT)	1kΩ @0°C, 375 Curve
PT Accuracy (Std).	0.12% @Ref, or ±0.55°F, (±0.3°C)
PT Stability	±0.25°F, (±0.14°C)
PT Self Heating	0.4 °C/mW @0°C
PT Probe Range	-40° to 221 °F, (-40 To 105°C)
Nickel (Ni)	1kΩ @70°F, JCI Curve
Ni Probe Range	-40° To 221 °F (-40 To 105°C)
Sensitivity
Thermistor	Non-Linear
RTD (PT)	3.850/°C for 1kΩ RTD 3.750/°C for 1kΩ RTD
Nickel (Ni)	2.950/°F for the JCI RTD

Wiring	One Pair Of 22AWG Wires
Wire Insulation	Etched Teflon Or Plenum-Rated
Mounting	12mm Hole, Push In Plastic Sheath With Peel-Off Insulating Adhesive Ring
Enclosure Material And Ratings	Plastic, Nema 1, Ul94
Environmental Operating Range	Unit With Etched Teflon Wire: -40 To 185°F (-40 To 85°C), Unit With Plenum-Rated Wire: -4 To 167°F (-20 To 75°C) 0 to 100% RH, Non-Condensing
Agency	ROHS, CE