Installation Procedure

Under Tile Cable Kit

1.	Make the electric povision as per instructions

2.	Measure the room and mark out the cable spacing as detailed in the instructions

3.	Layout out and tape down the cable

4.	Test the cable

5.	Fit the floor probe

6.	Connect the thermostat

7.	Tile over the using flexible adhesive and grout

8.	Wait at least one week before turning the heating on

Under Tile Cable Mat

1.	Make the electrical provision as per instructions

2.	Plan the start point and layout

3.	Prime the sub-floor with the primer provided

4.	Roll out the under tile mat, cutting the mesh turning when the opposite wall is reached

5.	Fit the floor probe

6.	Test the cable

7.	Tile over using flexible adhesives and grout