Handy heat insulated tile-backer boards are a high performance, reinforced insulating board. They are made of waterproof extruded polystyrene with a fibreglass mesh embedded on each face into a cement polymer coating for exceptional compressive strength & rigidity.
The use of insulated tile-backer boards will reduce warm-up times & reduce running costs in all cases, but they are especially recommended if installing under-tile heating on an un-insulated floor.
The boards can be fitted directly over floorboards, chipboard, plywood using galvanised screws & over existing concrete floors with ordinary floor tile adhesive (a rapid setting adhesive is recommended)
The boards are 0.75sqm each & are available in thicknesses of 10-50mm. The 10mm is by far the most popular size for existing floors, however for new floors (especially conservatories) the 50mm is the most popular thickness!
For technical details & more information visit www.tilebackerboard.co.uk
Insulation boards being fitted in a conservatory ready for undertile heating cables |
|
|
| |
|
|
Close up of 3mm underfloor heating cables on insulation board |
|
To view larger views of these images please visit our Gallery |
|
