Description
Over fit panel – Specification
Thermal Conductivity = 0.034 W/mK
Compressive Strenght = 300kPa @10% Compression
Our Profoil Grooved & Foilded Insulation panels are extruded polystyrene-grade KF300
with a sheet size of 1250mm x 600mm x 20mm.
In addition our sheets have 4 grooves @ 150mm centres with light bulb returns for 16mm underfloor heating pipe.
Over fit panel – They are low profile panels for laminate or Engineered wood floors.
Wet or Water based underfloor heating systems come in many permutations. For instance there are various different pipe sizes and thicknesses and many different ways of installation. These depend on level of insulation needed and depth available.
Low profile systems generally start from around 20mm in thickness with a water pipe of around 16mm. Overfit board Panels can be laid directly on an existing floor. This avoids the need to lift the current tongued & grooved chipboard or timber floor finish in order to gain access to the joists beneath. However, the final floor level should be carefully considered when using this system.
In Conclusion the over fit panel is designed to be used with Laminate or Engineered Wood flooring. They can’t be used with Vinyl or Tiles.
Why not contact us to discuss your requirements. 0.75m² per board 20mm thick for 16mm Pipe.
Reviews
There are no reviews yet.