Our 20w per linear metre in-screed cable is designed to be installed in a concrete screed (usually 60-100mm)
The system is a primary heat source & can be used under almost any floor covering.
The output is varied by the cable spacing & usually ranges from 120-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an 'off-peak' solution is required.
This cable is also ideal for use directly below thick stone & flagstone type flooring.
In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g.
conservatory for ad-hoc use) we recommend the under-tile system with insulation boards (or an under wood/laminate carbon film system)
Advantages
• High quality cable design
• Low cost
• Ideal for permanent heating of screed floors
• Also suitable for de-icing driveways
The table below shows the range of cables available from stock. Price includes heating cable, digital thermostat with floor sensor, VAT & delivery
Please contact us directly for further details & competitive trade prices
|
